Smart Digital Motor Starter

• Over load automatically cut off
• Under voltage / over voltage automatically cut off
• Single phase preventer
• Auto/manual mode selector switch
• MCB to interrupt the supply in faulty condition
• Hour meter to show the total time of run
• Reverse Phase protection.
• Startup delay time.

• Smart Digital Motor Starter Panel is very much suitable in agriculture for irrigation and industrial purposes.
• It can be operated in a voltage range from 200-480 VAC.
• One can set the voltage limit as well as current limit within which the motor has to be operated.
• High quality DOL Motor Starters developed with microcontroller for monitoring /controlling and PMC (Pre Magnetic Contractor) for instant switching.
• PMC is a modified concept of contractor with benefits of cost effectiveness & free from problems of Chattering & Coil burning.
• Starter can be operated in AUTO or MANUAL modes.
• When the AUTO mode is once selected, the starter automatically starts the motor whenever the power resumes in all three phases healthy condition.
• While in the manual mode, one can manually start and stop the motor instantly with the help of separate smooth push buttons.
• The starter is having smart digital ampere, volt and run hour meter(Optional).

With MPU Controller Microcontroller based technology Auto/manual/bypass mode selector switch Start / Stop push buttons Start delay time in Auto mode Continuous running capacity: 100+ hrs. Digital Voltmeter (R-Y, Y-B, B-R), ammeter, Run hour (up to 999 hr. LED Indications(Status and individual faults)(R-Y-B Phases, Healthy Power, Phase fail, Rev Phase Unbalance V, Over/U, Under Overload)Screw tight connection and ring type thimble for Inbuilt MCB for short circuit protection Wide Voltage range: 200-480 VAC Fabricated with Rust-free GI Sheet Wall mounting, compact size Heavy duty DMC connection terminals for Input and output
PROTECTIONS: Over voltage cut-off (fixed)Under voltage cut-off (fixed)Overload cut-off (Knob settable)Single Phasing cut-of reverse Phasing cut-off Phase Unbalance cut-off (~60 V).